TPDIN®
TPDIN-Monitor-WEB3 Prompts for a password out of box (Firmware 2.2.5)
In the newest firmware update, 2.2.5, you will be automatically prompted for a username and password when first trying to access a TPDIN-Monitor-WEB3. If you click sign in when prompted to put in a user name and password, and don't have a username or ...
How can I fix Unlicensed Timeout issues on my TPDIN-Monitor-WEB?
Please go to http://(IPADDRESS)/license.htm Provide us with the Hardware ID. We will send you the license key to enter on that page. We suggest you update the firmware to the latest to prevent this bug. You can only update after the unit is ...
How can I change my TPDIN-Monitor-WEB2 relays to Normally Closed (NC)
Unofficial hack. Note: This is an unofficial hack. Do this at your own risk. You can change the CH3 and CH4 relays to Normally Closed by changing the position of a soldered jumper wire inside the unit. Open the unit by removing all screws. Unsolder ...
What does the log entry “System Init *V2.3.5 WDT was triggered” mean?
The TPDIN2 rebooted via a power cycle or a software reboot. Note: V2.3.5 is the firmware version of your TPDIN2.
What do the error codes in the log file mean?
If it is a mail send error code, you can see a list here: Common problems that cause SMTP errors are: 1. No valid gateway or DNS entered in the Network Settings page 2. Incorrect SMTP server settings in Alert Email Setup page
Accessing Data and Controlling Relays on TPDIN-Monitor-WEB2/WEB3 via HTTP
You can access the real time readings and control relays on the TPDIN-Monitor-WEB2 via HTTP. To access the real time readings: HTTP://(ip address of device)/status.xml The xml result will look like this: The relays can be controlled via SNMP, Telnet, ...
Communicating with TPDIN-Monitor-WEB via TELNET
NOTE: This only works with the original TPDIN-MONITOR-WEB. It is not implemented in the newer TPDIN-MONITOR-WEB2. You can use the ability of telnet to connect to the TPDIN-Monitor-WEB TCP port and use the HTTP interface to control the unit. Connect ...
Saving Power via Time of Day and Periodic Power Cycle Control – TPDIN-Monitor-WEB
Problem: Sometimes your RemotePro® system doesn’t have enough power to keep your equipment alive for 24hrs per day and you really don’t need, for example a camera, to be powered on at night. Other times you want to be able to reduce your investment ...
How can I reset my TPDIN® product to factory defaults?
TPDIN-Monitor-WEB: Hold down the reset button while powering up the TPDIN-Monitor-WEB and hold for 15 seconds then release reset button. This should set the unit back to factory defaults. Note: Resetting to factory defaults doesn’t affect the IP ...
Email Setup for the TPDIN-SC48-20 V3
Gmail: Create an App Password in your Google account: Go to your Google Account. Select Security. Under "Signing in to Google," select 2-Step Verification. At the bottom of the page, select App passwords. Enter a name that helps you remember where ...
I cannot send email from my TPDIN® series product!
Following are the existing TPDIN products and what type of SMTP they support: TPDIN-Monitor-WEB Non SSL – Port 25 TPDIN-Monitor-WEB2 Non SSL – Port 25 ; SSL – Port 465 TPDIN-Monitor-WEB3 Non SSL – Port 25 ; TLS – Port 587 TPDIN-SC48-20 V1 Non SSL – ...
What network port do the TPDIN® products communicate on?
80 or 8000. This port can be changed in the user interface.
How many characters for username and password in the TPDIN® products?
TPDIN-Monitor-WEB: username and password fields on the Network Page accept up to 10 characters. TPDIN-Monitor-WEB2: username and password can accept up to 20 characters. TPDIN-Monitor-WEB3: username and password can accept up to 24 characters. ...
My WEB3 is connected to the MPPT solar controller with an RS485 serial cable but the current readings are all zero on the MPPT display and in the WEB3 MPPT page
The ground between the V- load output on the MPPT solar controller and the TPDIN-Monitor-WEB3 V- needs to be isolated for the MPPT controller to sense the currents properly. A TP-DCDC-1224 DCDC converter can be used to isolate the power and solve ...
Procedure for toggling the LOAD in the Firmware
Having physical access to the TPDIN-WEB3 Monitor and log into it. Select the MPPT tab: What you need to do now is to make sure the enable Load Toggle is selected You can toggle and then save: At this point you will toggle the load to off then back to ...
Does Tycon® have an IOS/Android App for remote monitoring that has calculator capabilities?
Yes, you can download this app for access to your remote monitoring devices and our Solar Calculators. IOS: https://apps.apple.com/us/app/tycon-systems/id6670769114 Android: https://play.google.com/store/apps/details?id=com.tyconsystems.tycon