How do I view my TPDIN-Monitor-WEB3 through Peplink cell router?

How do I view my TPDIN-Monitor-WEB3 through Peplink cell router?

 Step-by-Step Walk through
1.    Log into InControl2
    -Go to incontrol2.peplink.com
    -Sign in with your Peplink credentials.

2.    Locate Your Device
    -From the Organization → Group → Device list, select the BR1 Max Mini.
    -You’ll see its real-time status and LAN/WAN details.

3.    Enable Remote Web Admin
    -Under Device Details → Remote Web Admin, enable access.
    -This will create a secure tunnel from InControl2 to the device’s web admin page.

4.    Access Your Monitoring Device
    -Once you’re in the router’s admin page, navigate to Advanced → LAN → Client List.
    -You should see the TPDIN-Monitor-WEB3 device listed with its assigned IP.

  You can either:
   -Port forward from the router to the WEB3, OR
   -Use PepVPN/Remote Web Admin for a secure connection.


5.    Optional – Port Forwarding for RS 485 Device
    -If you need direct external access without InControl2, set up NAT Mappings/Port Forwarding so you can reach the WEB3’s IP remotely.
________________________________________
Quick Note on RS 485 vs Network Access
RS 485 is the physical serial interface, but since the TPDIN-Monitor-WEB3 also has a web interface, you’ll be connecting to it via HTTP/HTTPS over the LAN, not directly to RS 485. The BR1 Mini will simply act as the network gateway.
________________________________________

    • Related Articles

    • Communicating with TPDIN-Monitor-WEB via TELNET

      NOTE: This only works with the original TPDIN-MONITOR-WEB. It is not implemented in the newer TPDIN-MONITOR-WEB2. You can use the ability of telnet to connect to the TPDIN-Monitor-WEB TCP port and use the HTTP interface to control the unit. Connect ...

    • Saving Power via Time of Day and Periodic Power Cycle Control – TPDIN-Monitor-WEB

      Problem: Sometimes your RemotePro® system doesn’t have enough power to keep your equipment alive for 24hrs per day and you really don’t need, for example a camera, to be powered on at night. Other times you want to be able to reduce your investment ...

    • How can I reset my TPDIN® product to factory defaults?

      TPDIN-Monitor-WEB: Hold down the reset button while powering up the TPDIN-Monitor-WEB and hold for 15 seconds then release reset button. This should set the unit back to factory defaults. Note: Resetting to factory defaults doesn’t affect the IP ...

    • How many characters for username and password in the TPDIN® products?

      TPDIN-Monitor-WEB: username and password fields on the Network Page accept up to 10 characters. TPDIN-Monitor-WEB2: username and password can accept up to 20 characters. TPDIN-Monitor-WEB3: username and password can accept up to 24 characters. ...

    • I cannot send email from my TPDIN® series product!

      Following are the existing TPDIN products and what type of SMTP they support: TPDIN-Monitor-WEB Non SSL – Port 25 TPDIN-Monitor-WEB2 Non SSL – Port 25 ; SSL – Port 465 TPDIN-Monitor-WEB3 Non SSL – Port 25 ; TLS – Port 587 TPDIN-SC48-20 V1 Non SSL – ...