Will the EZ-Bridge work with my Linksys, D-link, router etc.?

• Related Articles

• Can I have a router on both sides of the EZ-Bridge® link?

  Yes, on the internet side of the link, the EZ-Bridge® would be connected to one of the LAN ports on the main router. On the remote side of the link the EZ-Bridge® would connect to the WAN or INTERNET port on the router. The remote side router needs ...

• EZ-Bridge LT+ TyconOS Wiki

  The information below is for EZ-Bridge® This information is used for the following models: EZBR-0214+; EZBR-DUAL-AC Status Overview The overview page contains link status information and other pertinent info regarding active Wifi and Lan interfaces. ...

• How many IP Cameras can I use with my EZ-Bridge LT2+ or LT5+ wireless link?

  The EZ-Bridge LT+ can support up to 100Mbps bandwidth. Normally people will see around 80Mbps due to RF interference or electrical noise or multi-path issues which cause packet retries and affect the overall throughput across the wireless bridge.</p> ...

• How do I access the EZ Bridge’s Web Interface?

  You can access the EZ Bridge’s web interface by going to its IP address. By default, the EZ Bridges are set as DHCP clients, meaning they will be assigned an IP address automatically by your router or DHCP server. If for any reason the EZ Bridges do ...

• How do I access the EZ-Bridge® to change settings?

  The EZ-Bridge® comes from the factory programmed to be plug and play. If the units are installed and powered up, they will automatically bridge the networks. If you want to change settings for any reason, you should refer to the user guide that came ...