Where can I find a rackmount for my RPSTL/ENC-STL enclosure? Are there 2U or 4U rackmounts available for Tycon Large Enclosures?

We don’t offer rack mounts, other than the built-in 1U included in the STL enclosure, but they are available in the open market.

• Related Articles

• RemotePro® and UPSPro® Battery Care

  RemotePro® and UPSPro® systems are designed to maintain proper battery charge within a defined range. Our systems have protections for over-discharge of batteries but batteries also self-discharge over time, so if they are left without any charge or ...

• RemotePro® and UPSPro® Troubleshooting

  Minimum Equipment Needed: Good digital voltmeter which will display DC Volts for Battery Voltage. Measure battery voltage at the charger/controller System Voltage Expected Battery Voltage (charging Expected Battery Voltage (not-charging12V – 13.5VDC ...

• How to connect my TP-SW8GBT/AT/PSV-U or TP-SW16GBT/AT/PSV-U Switch to the Tycon MPPT Solar Controller

  Applicable to the following products: TP-SW8GBT/AT/PSV-U TP-SW16GBT/AT/PSV-U TS-SC24-40N-MPPT TS-SC24-60N-MPPT The Tycon manageable PoE Switches can connect to the Tycon MPPT controllers via the RS485 connection and monitor the MPPT controllers. The ...

• Grounding a RemotePro and UPSPro system

  Grounding our solar systems aren’t required. As long as the mounting pole is grounded, it is okay. If mounting a system to a pole or a location that isn’t properly grounded, it is recommended to install a grounding rod and wire for the system. Over ...

• Can I lengthen the cable between the solar controller and the solar panels?

  Most of the Tycon RemotePro® systems come with a 20′ 12AWG cable. Sometimes a customer may want to mount the solar panels at a different location than the solar controller/batteries. This can be done as long as you understand that if you extend the ...