What is the App used for Bluetooth connectivity on the MPPT solar controllers?

• Related Articles

• What are the RS485 ports on the MPPT solar controllers for?

  All of our MPPT solar controllers come with two RS485 ports. These ports allow you to connect a TPDIN-Monitor-WEB3 using our TPDIN-CABLE-485 for remote monitoring of your solar system as well as for connecting a TP-SC-BT1 allowing Bluetooth ...

• I have a Tycon MPPT solar charge controller. My batteries are wired for 24V, but they are so low the controller thinks they are 12V batteries and won’t charge them

  The MPPT charge controllers by default are set for 12V/24V auto detect. Using the keys on the front of the unit go into the settings and set for 24V battery instead of 12/24 auto detect. Save the setting. Power down the unit by disconnecting the ...

• Turning the load on/off (TS-MPPT models)

  To turn the load on or off, first you need to press the silver button until you see the load information screen as seen below: When on this screen, hold the silver button down for 3 seconds and the load will turn on or off depending on what state the ...

• Selecting battery type using controller interface (TS-MPPT models)

  1. Hold the button down for 6 seconds from the main screen. This will bring up the battery type selection. 2. Press button until you see the desired battery setting flashing on the screen. 3. Hold button down for 6 seconds. This will save your ...