What if I don’t have good line-of-sight between my locations? How critical is line of sight?

What if I don’t have good line-of-sight between my locations? How critical is line of sight?

At under 1/4 mile the EZ-Bridge® is powerful enough that good line of sight isn’t very important. Over 1 mile, it is important to have good line of sight between the two units. Shooting through a couple of trees won’t have much effect on performance. 2.4GHz is more forgiving than 5Ghz.

    • Related Articles

    • How critical is line-of-sight when using the EZ-bridge.

      With Wireless Bridges, a clear line of site is always recommended. Any obstructions ie; Trees, Poles, Fences, and Buildings can block or reduce the power of a wireless signal. 5GHz is more sensitive to line of site issues. 2.4Ghz is more forgiving. ...

    • EZ-Bridge LT+ TyconOS Wiki

      The information below is for EZ-Bridge® This information is used for the following models: EZBR-0214+; EZBR-DUAL-AC Status Overview The overview page contains link status information and other pertinent info regarding active Wifi and Lan interfaces. ...

    • Can I power a second device off my EZ-Bridge-LT+?

      The RJ45 connectors on the LT+ don’t have PoE output capability, but you can use a 5.5 x 2.1mm DC Plug Jumper to power up the second EZ-Bridge. Maximum 10W output @ 15-24V DC. Note: The EZ-Bridge requires much less than 10W.

    • How can I secure SSH and Telnet on the EZ-Bridge

      If you want to tighten the security of accessing the EZ-Bridge unit through a terminal program like SSH or Telnet, we recommend the following: Set the listening port to a custom port. Any port other than 22 or 23 would work. We suggest port 899. ...

    • What is the maximum range of the different EZ-Bridge® units

      The LT and LT+ models have a range of up to 3 miles with good line of site. The Ultra 5 has a range of up to 4 miles with a good line of sight. The Ultra 2 has a range of up to 8 miles with a good line of sight.