Select What is the bandwidth / speed capability of the different EZ-Bridge® models? What is the bandwidth / speed capability of the different EZ-Bridge® models?

• Related Articles

• EZ-Bridge LT+ TyconOS Wiki

  The information below is for EZ-Bridge® This information is used for the following models: EZBR-0214+; EZBR-DUAL-AC Status Overview The overview page contains link status information and other pertinent info regarding active Wifi and Lan interfaces. ...

• How do I set up the EZ Bridge?

  EZ-Bridge ®- LT+ Series Initial Set-Up Procedure and Checklist Thank you for choosing the EZ-Bridge® Wireless Antenna System. Each Antenna system is factory tested and pre-configured so that most applications are true “Plug and Play” Some package ...

• My EZ-Bridge was working but now it keeps dropping connection or performance has degraded. What could be the problem?

  If your system was working but now seems to be sluggish or it is dropping connection, the most likely culprit is that some new wireless device was added in your environment and there is wireless interference causing the issue. The EZ-Bridge ships ...

• Can I power a second device off my EZ-Bridge-LT+?

  The RJ45 connectors on the LT+ don’t have PoE output capability, but you can use a 5.5 x 2.1mm DC Plug Jumper to power up the second EZ-Bridge. Maximum 10W output @ 15-24V DC. Note: The EZ-Bridge requires much less than 10W.

• How Can I Determine If My EZ-Bridge Antenna System is Working?

  There are different ways on checking if your EZ Bridge is working. After following the instruction manual on setting up the EZ Bridge, you may check if the EZ Bridge is working by: Checking the LED lights at the bottom of the antenna, if the antennas ...