My real time clock isn’t updating on my TPDIN®

• Related Articles

• NTP Time not Working or updating on my TP-SW4G-2SFP and TP-SW8G-2SFP

  Sometimes the date and time of the TP-SW4G-2SFP and TP-SW8G-2SFP are not updating automatically. This is usually caused by the switch not having the proper IP route to connect to the NTP server. First, you need to program the switch to have an IP ...

• I was updating the firmware on the TPDIN-Monitor-WEB3 and now I can’t access the unit?

  A communications problem during upgrade may have caused corruption in the flash memory or the “Upgrade and Reboot” button was double clicked or pressed twice. Follow these steps to recover: Press and hold the reset button while powering up the unit. ...

• Why can’t I open the TPDIN® web pages with my browser even though my computer is on the same subnet?

  If you are using an antivirus program like AVAST, the WEBSHIELD could be blocking the communications with the TPDIN web server. You need to change the settings in the AVAST antivirus to disable WEBSHIELD.

• What are the Differences Between Passive and Active PoE?

  If your device uses 802.3af or 802.3at it is considered to use active POE. What that means is that the PoE device (Camera/Radio/Telephone/etc.) will check the power coming in and if it doesn’t meet the device requirements it won’t power up. ...

• What does the VIN1+, VIN2+, VIN-, and FG mean on my DC to DC converter?

  VIN1+ and VIN2+ are used to power the device using 2 different sources. VIN- is there the negative wire connects to. FG is your chassis ground.