How do I change the Hostname (sysName) of the TP-SW4G-2SFP or TP-SW8G-2SFP?

• Related Articles

• Can I use two or more units of the TP-SW4G-2SFP / TP-SW8G-2SFP in the same network?

  Yes, you can use two or more units of the TP-SW4G-2SFP / TP-SW8G-2SFP / TP-SW8GAT/BT/24-SFP / TP-SW8GAT/24-SFP in the same network. If for any reason, using two or more of those switches causes problems with your SNMP software or your network, please ...

• IP address changes when factory resetting the TP-MS616

  The TP-MS616 IP address comes shipped with the IP address set to 192.168.1.10 as default. If you ever do a factory reset on this device, the IP address will change to 192.168.2.1. It is important to change the IP address back to 192.168.2.10 after ...

• NTP Time not Working or updating on my TP-SW4G-2SFP and TP-SW8G-2SFP

  Sometimes the date and time of the TP-SW4G-2SFP and TP-SW8G-2SFP are not updating automatically. This is usually caused by the switch not having the proper IP route to connect to the NTP server. First, you need to program the switch to have an IP ...

• How do I control the PoE ports on my TP-SW4G-2SFP or TP-SW8G-2SFP managed PoE switch using SSH?

  TP-SW4G-2SFP, TP-SW8GAT/BT/24-SFP, TP-SW8GAT/24-SFP and TP-SW8G-2SFP Managed PoE Switches PoE Port Control Using SSH: You can use an SSH capable terminal program such as Putty. “https://www.putty.org/” To access the switch through any of the RJ45 ...

• Are Tycon PoE Switches with SFP fiber ports single, dual or multimode fiber?

  All Tycon PoE switches with SFP ports can accept any standard SFP fiber transceiver modules. The SFP module that you select determines if it is single, dual or multimode fiber. Some standard SFP modules can be found on Amazon or from your favorite ...