Can I run my own wires through the mast.

Can I run my own wires through the mast.

Unfortunately the Harness that runs through the mast is maxed out and cannot be added to. You can do almost anything you need to with the 2x Cat5 cables and 6x primary wires that are custom manufactured into the harness.

    • Related Articles

    • What wires run through the mast/what power is available at the top?

      The mast is custom made with 2x Cat5 cables and 6x 14awg wires running through the harness which provides a data path from the top of the mast to your deck enclosure. We provide a variety of different PoE switches that can be installed at the top of ...

    • How Tall is the Mast?

      The Mast is 18’ off the ground to the top of the mast top extension.

    • How does the mast operate?

      Currently the only option we have to operate the mast is by using compressed air. The trailers currently come with a small air pump that supplies the compressed air needed to raise the mast. We are in the works of developing a hand crank option to ...

    • Why is my MPPT controller shutting the load off automatically?

      Our MPPT charge controllers have a built-in low or high voltage cut off, which protects the batteries and keeps them healthy for longer run times. One of the features the MPPT controllers have the ability to shut off during low voltage times (11VDC) ...

    • How do I determine runtime if the batteries aren’t at 100% charge?

      To determine the runtime of a battery system given its power consumption, voltage, and a discharge cut-off voltage of 11V, use the formula: Runtime (hours) = (Battery Capacity (Ah) * (Starting Voltage – Cut-off Voltage)) / Power Consumption (W); ...