Can I have a router on both sides of the EZ-Bridge® link?
Yes, on the internet side of the link, the EZ-Bridge® would be connected to one of the LAN ports on the main router. On the remote side of the link the EZ-Bridge® would connect to the WAN or INTERNET port on the router.
The remote side router needs to be configured to get its IP addressing information from the main router. Normally the remote router will get it’s IP address automatically via DHCP but sometimes it’s necessary to program a static IP into the remote router so it will communicate properly with the main router. You may need to contact the router manufacturer to get instructions for working with two routers.
We highly recommend that you have a working EZ-Bridge® link first, before attempting to add a second router. If you can’t get the second router working, we suggest you bring the second router to the first router and connect the two routers with a CAT5/6 cable. Work with the router manufacturers to get the two routers setup exactly how you want and then replace the CAT5/6 cable connection with the EZ-Bridge®. The routers should work the same.
Related Articles
EZ-Bridge LT+ TyconOS Wiki
The information below is for EZ-Bridge® This information is used for the following models: EZBR-0214+; EZBR-DUAL-AC Status Overview The overview page contains link status information and other pertinent info regarding active Wifi and Lan interfaces. ...
Will the EZ-Bridge work with my Linksys, D-link, router etc.?
he EZ-Bridge® works with all home and business routers and switches.
How do I access the EZ Bridge’s Web Interface?
You can access the EZ Bridge’s web interface by going to its IP address. By default, the EZ Bridges are set as DHCP clients, meaning they will be assigned an IP address automatically by your router or DHCP server. If for any reason the EZ Bridges do ...
How do I access the EZ-Bridge® to change settings?
The EZ-Bridge® comes from the factory programmed to be plug and play. If the units are installed and powered up, they will automatically bridge the networks. If you want to change settings for any reason, you should refer to the user guide that came ...
How many IP Cameras can I use with my EZ-Bridge LT2+ or LT5+ wireless link?
The EZ-Bridge LT+ can support up to 100Mbps bandwidth. Normally people will see around 80Mbps due to RF interference or electrical noise or multi-path issues which cause packet retries and affect the overall throughput across the wireless bridge.</p> ...