Best method/procedure to follow for first time installs of the EZ-Bridge?

• Related Articles

• EZ-Bridge LT+ TyconOS Wiki

  The information below is for EZ-Bridge® This information is used for the following models: EZBR-0214+; EZBR-DUAL-AC Status Overview The overview page contains link status information and other pertinent info regarding active Wifi and Lan interfaces. ...

• My EZ-Bridge was working but now it keeps dropping connection or performance has degraded. What could be the problem?

  If your system was working but now seems to be sluggish or it is dropping connection, the most likely culprit is that some new wireless device was added in your environment and there is wireless interference causing the issue. The EZ-Bridge ships ...

• How do I set up the EZ Bridge?

  EZ-Bridge ®- LT+ Series Initial Set-Up Procedure and Checklist Thank you for choosing the EZ-Bridge® Wireless Antenna System. Each Antenna system is factory tested and pre-configured so that most applications are true “Plug and Play” Some package ...

• How do I access the EZ-Bridge® to change settings?

  The EZ-Bridge® comes from the factory programmed to be plug and play. If the units are installed and powered up, they will automatically bridge the networks. If you want to change settings for any reason, you should refer to the user guide that came ...

• Can I have a router on both sides of the EZ-Bridge® link?

  Yes, on the internet side of the link, the EZ-Bridge® would be connected to one of the LAN ports on the main router. On the remote side of the link the EZ-Bridge® would connect to the WAN or INTERNET port on the router. The remote side router needs ...