Are the solar systems shipped complete with everything I need?

Are the solar systems shipped complete with everything I need?

Systems are shipped with everything that is needed except the mounting pole or tower and CAT5 cables (if needed to interconnect equipment).

Note: For 720W and 1300W solar systems, they come with the mounting pole included.


    • Related Articles

    • Do I need to ground my RemotePro or UPSPro system?

      Applicable Models: RemotePro systems UPSPro systems Over the course of Tycon's history, we haven't had many issues regarding ungrounded systems. As such, grounding our solar systems is not required as long as the mounting pole is grounded. If ...

    • RemotePro® and UPSPro® Troubleshooting

      Minimum Equipment Needed: - A voltmeter that can show DC voltage. - Wire Ferrules sized 12-18AWG is suggested depending on the system. Measure the battery voltage at the solar charge controller ports and then on the battery terminals to verify the ...

    • Can I add more devices to my RemotePro system without increasing the panels and batteries?

      You may need to add additional panels or batteries in order to allow new equipment to be introduced. You can calculate it by going to: “https://tyconsystems.wpenginepowered.com/calculators” Input your new total power draw, peak sunlight hours and any ...

    • Which systems come with a pole?

      All RemotePro systems with a 720W solar array or larger will come with a top of pole mount and a 6 inch round, 72 inch long pole that needs to be anchored to a concrete footing.

    • Can I lengthen the cable between the solar controller and the solar panels?

      Most of the Tycon RemotePro® systems come with a 20′ 12AWG cable. Sometimes a customer may want to mount the solar panels at a different location than the solar controller/batteries. This can be done as long as you understand that if you extend the ...